Using Foundation Coating for fixing a leaky foundation and Wet Basement in Toronto

Foundation Coating Description – For Repairing a leaky Wet Basement

This Bakor(TM) foundation coating is a waterproof emulsion composed of vacuum-reduced asphalt dispersed in a mineral colloid emulsifier. Environmentally friendly material, it contains no asbestos or volatile compounds. This coating is odourless, non-toxic, of heavy brush consistency and exhibiting excellent adhesion to both damp and dry construction surfaces. The cured coating presents a stable, ductile coating impervious to sustained contact with water. 18.9 L.

Bakor 700-01 is a damp proofing and waterproofing emulsion composed of vacuum-reduced asphalt dispersed in a mineral colloid emulsifier. It is odourless, non-toxic, of heavy brush consistency, exhibiting excellent adhesion to both damp and dry construction surfaces. The cured coating presents a stable, ductile coating impervious to sustained contact with water. Environmentally friendly material containing no asbestos or volatile compounds.

Bakor 700-01 is used as a waterproofing compound in membrane systems to control hydrostatic pressure or may be applied as a simple coating for dampproofing concrete and masonry. It is ideal for insulated concrete forms (ICF), preserved wood foundations (PWF), foundation walls, footings, split-slab floors, retaining walls and wing walls.

The Toronto Team of Aquatech Waterproofing

 

20 Hyde Ave. Toronto, ON, M6M 1J3.

Phone: 416-300-2191

Email: info@aquatechwaterproofing.ca

How Aqua-Bloc 770-06 18.9 can help with fixing and protecting your Leaky Wet Basement in Toronto, Mississauga, Scarborough and North York

 

The Aqua-Bloc 770-06 18.9-Litre Elastomeric Waterproof Membrane is a one-component elastomeric waterproofing compound designed to replace conventional hot-mop felt ply and/or pre-formed sheeting systems. It is applied in a single application, which cures through solvent evaporation to provide a heavy-duty “seamless” rubber-like, impervious membrane. It is perfect for use on concrete, masonry foundation walls, parking decks, planters and reflective pools. Use with Yellow Jacket reinforcing fabric to treat cracks and joints. Heavy bodied trowel grade coating to provide seamless rubberized asphalt membrane.

FEATURES

  • Seamless rubberized asphalt membrane
  • Excellent adhesion to most construction surfaces such as concrete, stone, wood, cement and metal
  • Retains flexibility over a wide temperature range
  • Cold applied requires no special equipment, such as kettles
  • Resistant to mild acid, alkalis, salt and calcium chloride solutions
  • Easily transported to small or “hard to get at” applications

 

SPECIFICATIONS

Qty18.9-Litre

Aqua-Bloc 770-06 Elastomeric Liquid Membrane is a one-component elastomeric waterproofing membrane. It is applied in a single or reinforced application and cures through solvent evaporation to provide a heavy-duty, seamless, rubber-like, impervious membrane. Aqua-Bloc 770-06 can be trowel or spray applied.

 

 

Also Available:

 

Basement-Waterproofing

 

AQUATECH BASEMENT WATERPROOFING TORONTO PROUDLY SERVING THESE AREAS FOR 20+ YEARS

Toronto GTA, Aurora, Barrie, Bowmanville, Brampton, Burlington, Cambridge, Cobourg, Collingwood, Caledon, East York, Etobicoke, Georgetown, Hamilton, Kawartha Lakes, Kitchener, King City, Leaside, Lindsay, London, Markham, Milton, Halton, Mississauga, Newmarket, Niagara, North York, Oakville, Oshawa, Peterborough, Pickering, Richmond Hill, Scarborough, St. Catharines, Toronto, Vaughan, Waterloo, Whitby, Uxbridge

Basement Waterproofing Near Me

 

FIND ANSWERS TO COMMON BASEMENT WATERPROOFING QUESTIONS

What is Basement Aqua-Bloc 720-38 for Basement Waterproofing in the Toronto area and the GTA?

 

Aqua-Bloc 720-38 Elastomeric Asphalt Emulsion Basement Waterproofing is an elastomeric, liquid-applied, emulsified asphalt membrane. It is designed for below-grade waterproofing of foundation walls and other structures. Aqua-Bloc 720-38 complies with, and exceeds, the requirements of CAN/CGSB 37.2.

Features of the Aqua-Bloc 720-38 for Basement Waterproofing in the Toronto

  • Water-based and VOC Compliant
  • Seamless low modulus elastomeric membrane
  • Excellent adhesion to most construction surfaces such as concrete, stone, wood, preserved wood, metal and polystyrene
  • Retains flexibility over a wide temperature range
  • Perfect for waterproofing ICF (Insulated Concrete Forms) foundation walls
  • Can be applied to damp or green concrete
  • Can be applied in one coat or in multiple coats with reinforcing fabric
  • Bridges cracks
  • Environmentally friendly due to no solvent content

 

Packaging

5 gallon and 55-gallon drum

specifications

Aqua-Bloc 720-38/Cold Fluid-Applied Waterproofing Membrane Guide Spec

 

 

 

 

Seamless low modulus elastomeric membrane, Retains flexibility over a wide temperature range, Excellent adhesion to most construction surfaces such as concrete, stone, wood, preserved wood, metal, and polystyrene insulation (ICF), Can be applied to damp or green concrete

 

18.93L Waterproofing 720-38 Emulsion Coating _ Best Buy Canada

 

Size: 18.93 L Aqua-Bloc 720-38 Elastomeric Asphalt Emulsion Waterproofing is an elastomeric, liquid-applied, emulsified asphalt membrane. It is designed for below grade waterproofing of foundation walls and other structures. Aqua-Bloc 720-38 complies with, and exceeds, the requirements of CAN/CGSB 37.2. It retains flexibility over a wide temperature range, has excellent adhesion to most construction surfaces such as concrete, stone, wood, preserved wood, metal, and polystyrene insulation (ICF), can be applied to damp or green concrete, bridges cracks, and contains no solvent and is environmentally friendly. Covers 2.5 square meters per liter, at a wet film thickness of 2.25 mm (90 mils). Can be applied in one coat or in multiple coats with reinforcing fabric (CAN/CGSB-37.3). Seamless low modulus elastomeric membrane • Retains flexibility over a wide temperature range • Excellent adhesion to most construction surfaces such as concrete, stone, wood, preserved wood, metal, and polystyrene insulation (ICF) • Can be applied to damp or green concrete • Bridges cracks • Contains no solvent and is environmentally friendly • Covers 2.5 square meters per liter, at a wet film thickness of 2.25 mm (90 mils) • Can be applied in one coat or in multiple coats with reinforcing fabric (CAN/CGSB-37.3)

Average Cost of Waterproof a Basement

According to the online estimates and calculators, waterproofing a basement can cost on average anywhere between $1,920 and $6,493. Per square foot, the average cost is $3 to $10.

How much does it cost to waterproof a basement from the outside?
Exterior Basement Waterproofing Cost. The average cost of waterproofing your basement from the outside with a coating or membrane is $3 to $6 per square foot, which typically includes materials and labour costs. The liquid or sheet membrane keeps water from penetrating the basement walls.
Is waterproofing a basement worth it?
Basement waterproofing is a valuable home repair. As with many home repairs, your basement waterproofing ROI varies greatly by region, size of the home and the extent of the waterproofing. However, nearly all experts agree that basement waterproofing is a valuable home repair that is well worth the expense
Is Basement Waterproofing covered by insurance?
It’s there for you in a lot of ways, but sometimes absent when you need it most. External water sources are almost never covered by average home insurance. And even flood insurance doesn’t cover every basement leak. If insurance classifies your water intrusion as groundwater, you can expect them not to cover it.
What is the best basement waterproofing method?
Waterproofing a foundation from the outside typically involves using polymers and membranes to coat the exterior of the walls, installing a trench drain underground, or a combination of both methods. When done properly, exterior drainage is generally considered to be the most effective way to waterproof a basement.
What percent of basements leak?
60 percent
The American Society of Home Inspectors has some pretty surprising statistics about wet basements: Most new homes will develop a leak somewhere in the basement within 10 to 15 years of being built. Over 60 percent of basements in existing homes have a moisture problem.
Can water come up through the concrete basement floor?
Water is a bitter foe of all the basements. YES, water around your foundation can come up through the concrete floor and can leave any material on its way soggy and damaged.
How do I stop my basement from flooding in heavy rain?
The most effective way to keep rainwater out of your basement is to install an interior drainage system. A proven solution for keeping the basement dry, a good waterproofing system minimizes hydrostatic pressure. An interior drain tile connects to a sump pump.
Exterior Basement, Exterior basement waterproofing
How long does it take for water to damage Foundation?
When dealing with water damage, you generally have up to 48 hours to react. If you fail to call in a restoration specialist before this clock runs out, you risk worsening property damage and mould growth.
What would cause water to come up through the concrete floor?
The sources of water leaks

Essentially, when water fills the ground due to heavy rainfall or snowmelt, for example, it runs along the outer walls of the foundation. If your foundation lacks insulation, is too porous or has cracks, moisture can then be introduced into the slab and water will appear in the basement.

Is it normal to have water under the basement floor?
It is normal because usually, the height of the water does not exceed the height of the gravel that you install when back filling the hole. And it will not cause any problems moving forward either.
Can water ruin a foundation?
There are a few ways water can cause damage to your foundation: It can cause wooden parts of your structure to rot. It can cause the soil under your foundation to erode or shift over time. This causes a lack of support for your foundation, which leads to shifting and cracking.
exterior basement waterproofing, basement waterproofing toronto, basement waterproofing
How do you keep water from coming through the concrete floor?
Seal Your Basement or Garage Floor – The proper method is to deep seal the concrete floor first with RadonSeal Concrete Sealer. RadonSeal provides the permanent waterproofing solution for concrete slabs by stopping capillary water seepage due to hydrostatic pressure or wicking water.
Does DampRid work in basements?
DampRid goes to work instantly, attracting and trapping excess moisture out of the air. … Ideal for larger spaces like basements, garages, where stagnant air and excess moisture is a problem. The 4 lb. Hi-Capacity bucket lasts up to 6 months, depending on temperature and humidity levels.
Will sandbags keep water out of the basement?
A heavier option that can be used to aid flooding protection and also reduce water damage is a sandbag. Installing sandbags in the basement does not guarantee a water-tight seal. … Sandbags need to be properly filed with sand or material to keep water from getting into the blocked-off basement area.
What is the best flooring for a basement that floods?
Since vinyl floors can come in planks or tiles and are not made of organic materials, they make great floors for basements that are prone to floods. Their photographic layer can replicate almost any look you want, from hardwoods to tile, so you won’t be missing the comfort of the hardwood look if you so desire.

AQUATECH BASEMENT WATERPROOFING TORONTO PROUDLY SERVING THESE AREAS FOR 20+ YEARS

Toronto GTA, Aurora, Barrie, Bowmanville, Brampton, Burlington, Cambridge, Cobourg, Collingwood, Caledon, East York, Etobicoke, Georgetown, Hamilton, Kawartha Lakes, Kitchener, King City, Leaside, Lindsay, London, Markham, Milton, Halton, Mississauga, Newmarket, Niagara, North York, Oakville, Oshawa, Peterborough, Pickering, Richmond Hill, Scarborough, St. Catharines, Toronto, Vaughan, Waterloo, Whitby, Uxbridge

Basement Waterproofing Near Me

20 Hyde Ave. Toronto, ON, M6M 1J3.

Phone: 416-300-2191

Email: info@aquatechwaterproofing.ca

How to prevent Leaky Wet Basement in Mississauga, Toronto, Scarborough and North York?

What is the cost of preventing a Leaky Wet Basement in Mississauga, Toronto, Scarborough and North York? What is the Cost of Basement Waterproofing? How can you pay the best and lowest price for a quality and qualified Basement Waterproofing company and still using a professional Basement Waterproofing contractor?

The right air and moisture barrier is one of the most critical components of the building envelope. It prevents water from coming into contact with the concrete foundation, thereby effectively eliminating the effect of capillary suction.

 

Better Science, Better Product

DMX Membranes is a manufacturer of World Class Air Gap Membranes that are used in the fields of waterproofing and flooring. DMX’s membranes are renowned for their innovative and advanced designs. We manufacture DMX AG (Foundation Wrap), DMX Drain 5X (Drainage Membrane) and DMX Drain 11X, 15X and 18X (Commercial Drainage Membrane).

DMX AG Foundation Wrap

Comfortable, Mold Free, Basement Floors

Your home and family deserve the best. Space-age contoured foam and unique dimple design provide the ultimate in sound absorption while allowing air to circulate beneath your floors, evaporating trapped moisture and eliminating harmful mold growth. The highly durable construction of our underlayments outperforms all other basement flooring underlayments, providing years of long-lasting quality, durability, and peace of mind. Our flooring underlayments are easy to install and there is NO NEED for expensive plywood or OSB subfloors.

BETTER SCIENCE • BETTER PRODUCT

water proofing DMX AGtm

DMX uses a specially formulated Polyethylene that provides a high environmental stress crack resistance to alkalines and acids found in the soil. In addition, DMX is made from 70% recycled resin. Our special extrusion process utilizes low heat and low shear to prevent heat degradation in the final product. The use of antioxidants and lubricants further ensures a smooth, superior quality membrane that outperforms the competition.

 

aquatech waterproofing winning homestars 2019 award


Applications

The following is an overview of the types of constructions that will utilize the unique and effective moisture control attributes of our residential and light commercial product lines.

These membranes are designed to control moisture that affects concrete foundations. Our membranes provide the ultimate moisture protection with ease of installation.

Foundations

  • Residential foundation walls
  • Light commercial foundations (less than 15′ in height)
  • Golf clubhouse and athletic complex foundation protection
  • Single level underground parking structure
  • ICF (residential), wood, concrete, specialty foundations
  • NOT RECOMMENDED FOR USE WITH CONCRETE BLOCK WALLS, unless the walls are completely waterproofed prior to installation of the foundation wrap

Specialty Applications

  • Underslab moisture barrier
  • Crawl spaces
  • Concrete top side retrofits for finishing basements into living space
  • Landscape drainage for residential settings
  • Drainage and ventilation between built-up residential roof decks
  • Protection of liquid-applied waterproofing products in non-hydrostatic soils conditions

Accessories

DMX Membranes manufactures a full line of accessory products to aid in the installation of the DMX AG™. These accessories withstand the rigors of the construction site.

2” diameter round Attachment Washers for finishing off the top flat tab of AG

2.5” square (4) stud DMX Quick-Clip for the attachment of the AG to the substrate

2” wide Mold Strip for finishing off vertical terminations of the membrane

1.25” long Anodized Steel Nails for securing the round and square fastners

Power Actuated Installation* Nail Guns for attaching the membrane to the substrate

Approvals

Warranty

Overview

Model # DMX-AG-1.98MCOM Store SKU # 1000796613

DMX AG Foundation Wrap creates an air gap between wet soil and your basement wall, allowing the poured concrete and concrete block wall to breathe and provides a clear negative side drainage path to disperse any ground moisture that might find it way behind the membrane. Wet soil never touches the wall next to your living space, thus reducing the chances of water infiltration into the basement.

  1. Each roll is 66 x 65×6
  1. AG Kit comes complete with 200 Washers and 5 pieces of Molding
  1. CCMC Approved
  1. ICC Approved
  1. Excellent chemical resistance
  1. 30 Year Service life at PH 4-8, -25°C

FAQs

HOW DOES WATER GET INTO MY BASEMENT?

Most poured concrete basements have cracks of some kind that occur during the curing process. This is very common at window openings, beam pockets, and sometimes at corners or elevation changes.

When the soil around the foundation gets wet, it creates a constant hydro-static pressure against the wall that will push water into the basement, even through the tiniest crack.

Moisture can also get into basements through capillary action which acts like a sponge and draws water from areas of high concentrations (exterior soils) to areas of low concentrations (interior basement walls), especially in the presence of minimal foundation protection.

DMX AG™ isolates these cracks and capillaries from the surrounding wet soil to prevent this from happening and provides a clear negative side drainage path for ground moisture to be redirected to the footing drains, eliminating lateral water flow into the basement.

HOW DOES DMX AG™ WORK?

DMX AG™ creates an air gap between wet soil and your basement wall, allowing the poured concrete walls to breathe. It also provides a clear negative side drainage path to disperse any ground moisture that might find its way behind the membrane. Wet soil never touches the wall next to your living space, thus reducing the chances of water infiltration into the basement.

The DMX AG™ is made of HDPE which is an impermeable material to water. When installed according to our installation guide, it keeps water exterior to the foundation walls.

This means dryer basements for the end-user and a wider choice of finishing materials for completing a basement area.

WHY DOES DMX AG™ HAVE DIMPLES?

The dimples in DMX AG™ create a negative side air gap that eliminates the hydrostatic load (pressure) that can push water into the foundation, via cracks and capillaries as discussed earlier.

Without the dimples in DMX AG™ the product would be in direct contact with the foundation exterior, minus a negative side clear drainage path that could potentially trap moisture against the wall should it get behind the membrane and force water intrusion into the basement.

The key to DMX AG™’s success is the dimple design for the control of hydrostatic pressure and ground moisture control.

CAN WATER GET BEHIND DMX AG™?

In most cases this is highly unlikely when installed properly. However, even if the sheet was damaged and water got behind it, the air gap would prevent water from getting into the home by diffusing hydrostatic pressure build-up and providing a drainage path to the footing tile.

Because there is no direct soil contact with the wall, water just drains down to the footing and away through the drainage system.

The configuration of the dimple structure allows for continuous flow of water along the path of dimples and air gap to the footing drain and resists the transport of drainage water to the foundation wall.

The “conical” shape of the dimple provides a low resistance to vertical water flow and minimizes lateral movement of water, providing maximum protection of the foundation wall from moisture contact with the wall

DO I NEED SPECIAL FASTENERS TO INSTALL DMX AG™?

You will need DMX Washers™ for attaching the membrane to the foundation.

Use the 1¼ inch concrete nails for poured concrete foundations and 1½ inch coated deck screws for ICF foundations.

DMX FlexTrim™ is available for sealing cut edges in the membrane where the flat panel has had to be trimmed off, such as around basement below grade windows or along the top of the membrane on a slope.

For further details, download our DMX AG™ installation manual.

ON WHICH TYPES OF FOUNDATION CAN I USE DMX AG™

Every type you can think of – poured concrete, insulated concrete forms (ICF), and wood foundations.

CAN I USE DMX AG™ FOR REPAIRS AND RENOVATIONS?

Absolutely! DMX AG™ will protect everything from a modest crack in a residential foundation to the stone foundations of century-old churches and homes.

WE HAVE HEAVY CLAY SOIL. CAN WE USE DMX AG™?

Yes! We suggest installing an extra row of DMX Washers™ in the body of the DMX AG™ to help stand up to the vertical pressure heavy clay soil can exert on the membrane and the wall (see our installation manual for details).

How can you Fix a Leaky Basement in Toronto?

 

Everyone has their areas of expertise.  Doctors know about health, teachers know education, plumbers know plumbing.  Often, when things go wrong that are outside of a person’s area of knowledge, they seem catastrophic and mysterious to the point of being unsolvable.

Home maintenance in Toronto often falls into that category.  When something breaks or ceases to function in the house, many homeowners have no idea why it happened or how to fix it; they have to call “the maintenance guy.”  You know, the guy:  the air-conditioning guy, the window guy, the raccoons-in-the-attic guy.  When the guy shows up and does his magic, all is well again.

Speaking as the “wet basement guy,” I want to explain to Toronto homeowners that when they have water in the basement it’s not necessarily a catastrophe and it usually can be easily fixed.  Also, there is simple maintenance that anyone can do that can prevent Leaking Basement water in your Toronto basement from coming back.

 

How Much Does it Cost to Waterproof a Basement?

 

There are a number of factors that determine the cost of waterproofing a basement.  Below are some of the more significant variables.

Factors Influencing the Cost to Waterproof a Basement:

Foundation Type

The first step in solving a basement seepage problem is to determine what the foundation was constructed of.  Foundations in the Chicago area are most commonly built using poured concrete.  Cracks are the most common source of basement seepage in poured concrete foundations.  Homes found in Rockford, Northwest Indiana and Wisconsin are often built using concrete blocks.  Older homes are typically built using other types of masonry such as brick and stone.  Each type of foundation requires a different method of repair.

Basement Waterproofing Costs in Toronto

Knowing the basement waterproofing costs when you have a Leaky Wet Basement in Toronto is recommended before starting a basement waterproofing project. While looking at national averages we can provide a general idea, such numbers usually do not include factors that may affect the final price, such as local labour hourly rates, material costs and any local permits required for the Chicago basement waterproofing project.

As our numbers show in 2021 average cost that homeowners paid for basement waterproofing in Toronto are between $1,624.00 and $1,768.00.

 

Aquatech Basement Waterproofing Toronto

 

 

 

 

Leaky Basement Waterproofing Toronto Award

 

This Basement Waterproofing Chicago Quote Includes:

  1. $8.00 to $8.00 per square foot material costs.
  2. Average labour costs to waterproof basements in Chicago, Illinois.
  3. Average costs for materials and equipment for Wet basement waterproofing in Toronto.
  4. All project costs (surface preparation, components and machinery), and cleanup fees.

This Toronto Basement Waterproofing Cost Estimate Does NOT Include:

  1. Any permits required for basement waterproofing Chicago projects.
  2. Inspection and/or Chicago building fees.
  3. Materials and supply Cook and Illinois sales taxes.
  4. Materials and supply Chicago sales taxes.
  5. Any general contractor fees, if used for the project. Such fees generally add another $203.52-$254.40 to the total.

For reference it may be helpful to compare the costs from surrounding towns as well:

How Did I Get Water in my GTA Basement?

The water that ends up in the basement Foundation comes from the ground, either because of a high water table or saturation caused by heavy rains or poor water management.  There are various points of entry for this water; the most common is non-structural cracks in poured concrete foundation walls.  Water can also cause a wet basement in Toronto through porous masonry or deteriorated mortar joints, through the cove joint or cracks in the basement floor, through floor drains, around windows, doors and openings for pipes and utilities and over the top of the foundation wall.

How Do I Avoid Getting Water in My Toronto Basement Again?

The most important maintenance work for a Toronto homeowner will take place on the outside, making efforts to keep unnecessary water away from the foundation:

Keep gutters clean and flowing to avoid rainwater spilling over and soaking the ground next to the house.

Extend downspouts at least 10’ away from the house to avoid dumping concentrated amounts of water at the corners of the Wet Basement foundation.

Make sure that grading slopes away from the house and that landscaping or outdoor hardscape doesn’t trap surface water around the house.

AquaTech Waterproofing

20 Hyde Ave. Toronto, ON, M6M 1J3.

Phone: 416-300-2191

Email: info@aquatechwaterproofing.ca

PLATON foundation wrap to fix Leaky and Wet Basement Foundation in Toronto

PLATON foundation wrap keeps wet soil away from the foundation wall. Any moisture that may find its way past the membrane is carried to the foundation drain by the air gap drainage path. Platon Foundation Protector is commonly used to waterproof block walls, poured concrete walls, permanent wood, existing foundations and Insulated Concrete Forms (ICF).

 

PLATON is a rugged, dimpled high-density polyethylene (HDPE) membrane that keeps foundations and flooring dry. PLATON creates an impermeable vapor barrier and air gap, allowing concrete to breathe while controlling moisture.

PLATON keeps wet soil away from the foundation wall. Any moisture that may find its way past the membrane is carried to the foundation drain by the air gap drainage path.

PLATON is commonly used to Basement waterproof block walls, poured concrete walls, permanent wood walls, existing foundations and insulated concrete forms (ICF).

1 1/4 in. concrete nails are required for the installation of PLATON membrane.

Offered in certain stores only. Verify with your local Canac store for availability.

laton Foundation Wrap: Features
  • Made from tough, durable High-Density Polyethylene (HDPE)
  • Patented Speedclip fastens to all types of foundations in any kind of weather
  • Economical
  • Easy to install

COST OF WET BASEMENT WATERPROOFING IN TORONTO USING PLATON

 

Basement Waterproofing in Toronto how to install?

Foundation Preparation • Break off form ties and sharp points • Clear stone and debris from footing • Patch round tie rod holes (no need to patch flat form tie breaks used with most aluminum wall forming systems) • Parge or dampproof the lowest course of block foundations • Determine finished grade and mark with a chalk line • When using Speedclips, caulking is used between the smooth tab and wall to prevent dirt from getting behind the membrane and clogging the air gap. Either run a bead of caulk 1” below the chalk line before installing the Platon OR, after Platon is installed, caulk along the top of the Platon to seal any open gaps. • When using Speedstrips or Speedclips and Platon Molding, caulking is not required. Begin Installation • Unroll Platon, working from left to right, dimples toward the wall. Smooth tab at the top follows the chalk line. Where full height attached garage foundation meets house, extend Platon 12” onto garage foundation. (Also see Jump Walls – Page 7) • Nail one Speedclip to act as a pivot, unroll a 10′ length of Platon, pull the smooth tab tight, tack with another Speedclip and continue until the foundation is wrapped. • Fold and crease Platon at corners to get the best fit Notes • Platon membrane must extend from finished grade (chalk line) to the top of the footing. Platon can be sawn to height while rolled up. • Standing the roll on the footing when unrolling Platon is easiest. • Excess membrane (if any) may be folded out and cut even with the footing edge. Crease the Platon sharply at the footing/wall corner and lay flat on the footing to prevent pull-down. • Where finished grade slopes (e.g. walkout basements) install tapered sections first. 4 NOTE: Overlap vertical joints by 20” (if water enters the seam it will flow to the footing before it reaches the wall)

Wet Basement Toronto Cost

STEP 1

Prepare

Break off all ties and projections on the wall and clear stone and debris

from the footing.

Seal tie rod holes with mastic. Insulated Concrete Form (ICF) walls do

not need any surface preparation. Parge block walls.

Chalk a line at finished grade around the foundation.

STEP 2

Chalk And Caulk

Run a generous bead of caulking 25mm (1”) below the chalk line.

• If using Speedclips, caulk between the smooth tab and the wall to prevent

dirt from getting behind the membrane and clogging the air gap. When

using Speedclips and Platon Moulding, caulking is not required.

STEP 3

Roll Out

Working from left to right, unroll the membrane along the foundation,

dimples toward the wall, smooth tab at the top, following the chalk line. Keep

the smooth tab tight to the wall and “tack” it up using Speedclips.

• Platon must wrap the foundation from a point directly touching the top

of the footing up to finished grade or ground level.

• Where the finished grade slopes (for example, walkout basements),

install tapered sections first.

• If the height of the roll permits, Platon can be creased sharply at the

foundation/footing joint and brought out over the footing.

• Alternatively, excess membrane may be folded out and cut even with

the footing edge.

• Standing the roll on the footing when unrolling Platon is easiest.

Joints

For vertical joints between rolls, overlap a minimum of 51cm (20”). Water in

the joint will flow to the footing drain before it reaches the wall. Horizontal

joints, if required, should be overlapped by 5 dimples, with the upper course

over the lower one.

STEP 4

Fasten

Fasten with Speedclips 30cm (12″) apart along the top of the membrane.

The Speedclip dimples mesh with the top two rows of Platon dimples and

the Speedclip offset presses the smooth tab tight to the wall. Nail (or screw

on ICFs) through the small center hole between dimples.

Alternatively, fasten with Platon Plugs and nails in the second and third

row of dimples, spaced 20cm to 30cm (8″ to 12″) apart. Secure the smooth

tab with Platon Moulding strips along the top of the tab.

Heavy Clay Soil

• For rolls taller than 2.06m (6’9”), install a second row of Speedclips 61cm

(24”) apart, half-way up the wall. Backfill carefully in three or more lifts.

• When installing 3.05m (10’) Platon, “tack” the roll 1.83m (6’) up from the

footer with Speedclips 61cm (24”) apart, then use a ladder to fasten

the top.

• Without Speedclips, clay soil requires additional plugs in the fifth

row of dimples.

STEP 5

Platon Moulding

Moulding seals open air gap areas of Platon where dirt could enter and

clog the air gap. Typically, these areas are the beginning and end points

of installation. No caulking is required when used in conjuction with

Speedclips because Platon Moulding provides a continuous seal along

the top of the membrane.

3

Visit armtec.com for more information.

STEP 6 – Special Applications

Corners

Bend and crease the membrane to provide the best fit.

Windows

Cut Platon membrane flush with the side and 8cm (3″) lower than the

window opening. If using Speedclips, move the cutout piece down to seal the

open horizontal cut, mesh the dimples and fasten with Speedclips. If using

Platon Plugs, continue the nailing pattern below the window opening and

seal the open horizontal cut with Platon Moulding.

Window Wells

The window well is installed over the membrane. Trim any exposed Platon

inside the window well, along the sides, and caulk.

Sloped Grades

NOTE:

Install Platon on the lowest elevation first, then the sloped grade, then the highter elevations.

For a gradual slope, measure the grade change chalk line length, add

51cm (20″) for joint overlap,and cut that length of Platon. Install with the

smooth tab following the chalk line, fasten with Speedclips or Platon Plugs

and Moulding, and trim along the edge of the footing.

Steep Change in Grade

NOTE:

Install Platon on the lowest elevation first, then the sloped grade, then the highter elevations.

Cut the membrane to match finished grade and seal the open edge with

caulk and Platon Moulding.

Tall Walls

Overlap Platon horizontally when the distance from the footing to the

finished grade exceeds the roll height. Cut a section of Platon into

predetermined widths (trim off the smooth tab) and install along the

bottom using Speedclips. Install the full-height roll (with a smooth tab),

overlapping the first strip by at least 15.2cm (6″).

Jump Walls

For example, a 1.2m (4′) frost wall joins a 2.4m (8′) basement foundation.

Extend Platon 61cm (24″) along the frost wall (shown right) and cut Platon

horizontally so that it is flush with the bottom of the frost wall. Secure the top

section to the frost wall and the lower section to the basement wall. Repeat

the procedure on the other side of the frost wall, overlapping the Platon

below the frost wall. Cap vertical open gaps with Platon Moulding

and caulk the gap at the frost wall and foundation wall junction.

Pipe Projections

The pipe must be sealed to the foundation with hydraulic cement before

Platon is installed. Split Platon vertically from the pipe to either top or

bottom. Cut it snug around the pipe. Caulk around the pipe and both sides of

the split. Apply a 61cm (24″) wide patch of Platon over the split and fasten

with Speedclips or Platon Plugs.

Tear Repair

Caulk around the tear. Apply a 61cm (24″) wide patch of Platon over the tear,

meshing the dimples, and fasten with Speedclips or Platon Plugs.

 

How Much Does it Cost to Waterproof a Basement?

 

 

Looking for Basement waterproofing and fix Leaky Basement and Wet Basement in Toronto?

CALL AQUATECH BASEMENT WATERPROOFING

AquaTech Waterproofing

DELTA Membrane Systems for Basement Waterproofing in Toronto?

 

DELTA®-MS is made of a special high-density polyethylene (HDPE) resin. The membrane is remarkably impermeable to water and water vapor and unaffected by acidic or alkaline environments. Equipped with highly efficient additive packages, the HDPE is stabilized against oxidation and provides outstanding compressive strength, impact resistance, chemical and environmental stress crack resistance (ESCR).

IN TORONTO YOU SHOULD TACKLE THE WET BASEMENT PROBLEM BEFORE IT STARTS

Whether it be a residential home or a multi-family apartment building, our knowledge, experience and proven products will give your project the protection it needs.

DELTA Membrane Systems specializes in providing products that prevent water from penetrating your building.


The company has been working in the Toronto and GTA area building market for almost a decade and is made up of a team of skilled and knowledgeable Basement Waterproofing individuals, trained to recognize water problems before they start and apply the right systems to keep your home dry and leak-free.

All of the product manufacturers


have met our demands for technical support, service, on-site training of professional installation techniques and written warranties that cover products, performance and installation.
We are committed to being the best in the waterproofing industry so that we can give you, the customer, the best BAsement waterproofing, Wet Basement and Leaky Basement protection for your home in Toronto.

Delta Products warranty

 

Delta provides a 20-year product warranty from the manufacturer, and a 7-year transferrable Installation warranty when using a Certified MS Installer.

DELTA®-MS(Membrane System) Foundation Waterproofing Membrane. TM Below-grade foundation waterproofing for masonry and poured concrete structures.

Dealers have worked with DELTA Membrane Systems for a long time now. Their service and attention to detail have always been top-notch. The quality of the product has been an industry leader and we wouldn’t trust our projects with anything less. It has been a pleasure working with DELTA Membrane Systems and we look forward to working with them in the future.

Product Description DELTA®-MS is a highly effective waterproofing protection system based on a uniquely formed air-gap membrane. The main component of DELTA®-MS is the plastic (HDPE) membrane, formed in a dimple pattern to create an air-gap at the foundation wall. This unique design allows any water getting past the dimpled plastic sheet to fall freely to the footer drain. This membrane is remarkably impermeable to water and water vapor and impervious to acids and other agents. DELTA®-MS HDPE is tough, resilient and durable with an expected service life of more than 50 years. Function The membrane’s key job, the first principle of fail safe water management is to keep water from ever touching the wall on it’s way through the soil to the footing drainage systems. DELTA®-MS provides two lines of defense. The first is an impermeable plastic sheet that is waterproof. The second is the dimpled structure that offers a free drainage path. In the event that water passes the first line of defense, it can flow freely down the air-gap to the footer drain. Unlike a coating, DELTA®-MS bridges all size cracks, ignores damage points, and deflects water as well as soil dampness. It also allows for the drainage of construction moisture to the footer drain. Residential Construction DELTA®-MS is up to one half the price of conventional waterproofing systems, and offers a complete protection system for foundation walls. When used on the exterior of poured concrete, concrete block, or preserved wood foundation (PWF),

Benefits of DELTA®-MS: • acts as an air-gap and capillary breaking waterproofing and drainage membrane • keeps soil moisture from touching the wall, condenses and drains construction moisture to the footing drains • is a safe, non-toxic product that does not require any protective respiratory or handling devices during installation • installs quickly • bridges cracks and ignores damage points of foundation walls • forms an independent skin around the basement • does not require any special preparation of the concrete foundation wall, beyond code requirements • is environmentally friendly – recyclable Advantages of DELTA®-MS: • high-density polyethylene is impermeable to water and water vapor. • outlasts the life of the structure (will not break down or disintegrate due to soil acids.) • is non-polluting and non-toxic • can be installed on damp or frosty surfaces • installation is unaffected by temperatures (-22˚F to +176˚F/ -30˚C to + 80˚C) • requires no maintenance • available in large sheets, thereby minimizing seams • unaffected by freeze-thaw cycles • spans across all cracks and other surface defects Evaluation Reports (Certifications) Foundation Waterproofing Membrane – ICC ES, ESR-2303 Drainage Layer – CCMC # 12788-R Dampproofing – CCMC # 12658-R

The information printed in this blog reflects product information and specifications at the date of printing. The manufacturer reserves the right to make changes when necessary.

20 Hyde Ave. Toronto, ON, M6M 1J3.