Are you dealing with a damp basement? Or are you looking for Wet Basement Solutions to keep your basement from flooding? Regardless of your purpose, it’s a great idea to invest in basement waterproofing for your home so you can protect what you own, avoid harm, and save money instead of having to repair a flooded basement or replace damaged things.

 

It can be tough to know where to start when looking into basement waterproofing. However, finding an efficient solution to leaky basement walls or water coming up through the ground will save you time and money in the long run. Here’s a short rundown of your basement-water-proofing methods.

 

A damp basement not only wreaks, but it’s also susceptible to mould, so it shouldn’t use for storage or living. Many attributes may cause basement water seepage, leaks, flooding, and moisture; some are simple to repair, while others necessitate the assistance of a specialist who specializes in basement waterproofing. Correctly done basement waterproofing can avoid mould, structural, and indoor air quality issues associated with water in the basement with the proper basement waterproofing solution.

 

There is no such thing as a one-size-fits-all solution for waterproofing a basement. The best remedy for your home will determine the cause of the issue, the location of your home, and the type of foundation you have. Each basement and condition is different, so it’s essential to figure out where the moisture is coming from and develop a complete solution that will last. The most popular interior and exterior basement waterproofing methods, as well as details about each basement waterproofing service, are listed below to help you choose the best choice for your home.

 

Interior Sealants & Waterproofing:

Water enters the base most often through cracks in the mortar. The good news is that these cracks are simple to repair from the inside. Special sealants are inserted into the opening, penetrating the outside and sealing the route against moisture and leaks. 

 

These sealants typically have extended warranties that last for a long time. While interior sealers effectively prevent leaks and humidity, they will fail if the foundation is subjected to high hydrostatic pressure (water pressure).

 

It’s also an excellent option to use waterproof coatings on the interior of your basement. Concrete waterproofing coatings are permanent and perform well in areas with a small amount of dampness or condensation. Major leaks and basement floods are beyond the reach of sealants and waterproof coatings.

 

  • Interior and Exterior Drainage:

If water has found its way into your home due to a leak, a sound drainage system is an excellent way to keep it under control. The most convenient way to use drainage within your basement is to build a sump pump that collects water from inside and drains it away from your house. Interior drainage systems work by draining underground water from alongside your home’s foundation and pumping it out of the basement. 

 

Exterior waterproofing Toronto drainage systems should function in a power outage, extreme flooding, or a heavy snowstorm of melting snow. Water drainage systems are an effective way to keep water out of your home and basement, and they can even be airtight and used with vapour barriers to keep mould and mildew at bay.

 

  • Exterior Waterproofing:

Exterior waterproofing stops water from entering your home in the first place, preventing damage to the base or the interior of your basement. This process requires excavating to the foundation’s bottom around the building. After that, the walls coat with a waterproof coating waterproofs the walls while directing water to a drainage system. After that, it will drain correctly to a sump pump or down a slope away from the base. Water will not reach your home or basement through the walls or the foundation using this process.

 

Conclusion:

Nobody wants to come home to a flooded or leaky basement, so it’s essential to take precautions ahead of time and be ready if a leak does occur. As each situation is different, there is no single best way to protect your home from leaks and moisture. Some homes may only need a coat or two waterproof sealers, while others may require a drainage system and a waterproof sealant. When you work with Basement Waterproofing Hamilton, they’ll perform a detailed analysis of your basement, foundation, and home to develop a custom solution to your problems.

Your basement is more than just a place to stow the miscellaneous items you’d rather keep hidden. It’s also the base for the rest of your building. This reality alone would be enough to explain basement waterproofing, but there are other ways in which this small measure will secure your home.

Investing in proper Exterior Waterproofing Services Interior Waterproofing Services is one way to avoid the adverse effects of humidity. Roof leakage solutions, terrace waterproofing, basement waterproofing, drain building, and so on are all included. It is essential to find out waterproofing contractors who can advise you on your home’s best type of waterproofing.

Cementitious waterproofing, bitumen coating, sheet membranes, polyurethane liquid membranes, and other waterproofing techniques are available. Continue reading to learn about the various reasons why you should waterproof your house.

Reasons you should waterproof your basement:

  • Protection from Flooding:

In a country like Canada, where the Monsoon season is irregular, there is always the risk of your home flood due to heavy rain. You will protect your home from water damage and additional expenses incurred in fixing the damage if you have a waterproofing solution in places, such as an operational drainage system or a water-resistant sealant.

  • Property Damage Prevention:

Moisture can cause spalling and acid damage in addition to water damage. When the concrete on the surface begins to crack and break apart, this is known as spalling. Aquatech basement waterproofing could indicate a critical need for waterproofing.

 

The formation of brown or rust-coloured stains and markings on the floor or walls, on the other hand, is acid damage. When water forces through a wall or floor, and the minerals are left behind, this happens. Improved humidity can also lead to the rotting of wooden structural components. It can result in sagging floors or walls that collapse. Moreover, waterproofing the area around your house, i.e. where the walls and floors meet, decreases the possibility of shifting and prevents foundation cracks

click to call aquatech waterproofing - call to action

 

  • Structural Stability Improvement:

Even a tiny amount of moisture can cause long-term damage to your home. It can lead to the formation of faults in the floor and walls, weakening them and causing rotting. The basement may harm by excessive moisture created by hydrostatic pressure or upward pressure of groundwater if it is not waterproof. It can compromise the foundation’s sturdiness, causing severe damage.

 

  • Reduces Overall Moisture:

Simply having moisture in the air will make your house feel warmer in the summer, affect paper items, speed up the melting of metal items, and ruin your valuable items. Since liquid water spreads upwards on convection, waterproofing the base of your house is necessary to avoid increased humidity.

 

  • Helps in the prevention of health problems:

Mould can begin to develop within 24-48 hours of water entering a house if it is not correctly waterproofed. Mould and mildew grow in the warm, humid atmosphere of a basement.

Mould and mildew infect indoor air and cause respiratory infections, skin irritation, asthma, eye infections, coughing, wheezing, and breathing difficulties. Dust mites have also been observed to survive in humid environments. These cause allergies and other diseases. Other insects and rodents are likely to thrive in wet weather.

 

  • Increases the value of your home:

Waterproofing your home is an investment that will help in the long run. Exteriors and interiors that waterproof add value to your home by making renovation and furnishing simpler. It provides additional cover, lowering potential maintenance costs. All of this makes the house far more appealing to a potential buyer. Also, basement waterproofing issues have been shown to reduce the value of a home by about 20%.

 

  • Electricity bills decrease:

The temperature in the basement would increase during the summer. The cost of cooling this hot air is higher. In the winter, though, cracks in the foundation and walls will enable cold air in given your best attempts to keep the house warm. It can be avoided by ensuring that your basement has proper waterproofing systems in place. In reality, waterproofing your home will save you 10-15% on your annual energy bill.

 

  • Reduction in cost of insurance claim:

Foundation cracks, flooding damage, and rotted wooden beams are examples of water damage caused by faulty waterproofing. These account for about 20% of all insurance claims, making them a sizable bulk of change. In the long run, a small investment in basement waterproofing services will avoid these losses and ensure that homeowners don’t have to spend too much money on insurance claims.

 

Wrapping Up:

Water not only damages the structure but also puts people’s health at risk. Now that you understand why your home needs waterproofing, you may begin searching for waterproofing service providers in your city. Make sure you hire the best basement waterproofing Toronto for the weather and the state of your house.

 

Basement waterproofing leads to the materials and techniques used to keep water out from a building’s basement. Waterproofing a basement below ground level can require waterproofing materials, pipes, and sump pumps, along with other items. Basements are especially vulnerable to dampness and moisture deposition. Hydrostatic pressure creates under basement walls and floors related to water in the soil.

Water can be forced into cracks with this hydrostatic strain, causing significant structural damage, fungus, rot, and other moisture-related issues. Improper soil and drainage systems incorrectly designed and maintained sewer pipes, an inappropriate slope, hydrostatic pressure, cold air, and other factors all lead to this. Basement waterproofing creates to avoid any of these problems. There are many different waterproofing types that your basement may require, based on your house’s time and condition. Learn more about types of basement waterproofing.

Types Of Basement Waterproofing: 

  • Interior Waterproofing

     

Interior waterproofing, Interior basement waterproofing

Interior waterproofing, as the names imply, focuses mainly on the walls and ceiling of your basement. This type of waterproofing aims to keep water and fungus out of the usable space in your basement. If your basement walls do not paint, you can have concrete waterproofing coatings or silicate-based concrete sealers to keep water out.

For extra protection, ensure they coat with waterproof material. The cost of waterproofing basement walls from the inside and waterproofing basement floors with concrete coatings is approximately equal to exterior waterproofing.

  • Interior Basement Drainage:

Interior drainage is more like an addition to many other waterproofing services than is a type of waterproofing. When water stabilizes in your basement, this can allow mildew to grow, requiring mold removal. Interior basement drainage avoids damage by water removal that enters during heavy rainfall or flash flooding. A sump pump system can be required depending on the design of your basement to ensure complete drainage.

  • Exterior Waterproofing:

     

Exterior Basement, Exterior basement waterproofing

Waterproofing basement walls from the outside includes more extensive procedures to prevent water from entering the home’s interior. It is the most comprehensive and effective form of waterproofing a basement. It solves the problems of unequal grading and poor drainage. To completely prevent your basement from becoming damp and water from causing damage to your home, hire a team of basement waterproofing solutions toronto to build a drain around your building, down to the foundation floor, and install proper drainage. It may also be appropriate to add a waterproof coating or panels to the base and add French drains.

Average Cost of Basement Waterproofing

First, let’s take a look at a certain average basement waterproofing price. According to online surveys and calculators, waterproofing a basement will cost between about $1,920 and $6,493. The average cost per square foot is $3 to $10.

Maintenance work can cost as little as $600, although more extensive and complicated waterproofing jobs can cost as much as $10,000.

Benefits of Basement Waterproofing

Although water may make its way in via the cracks in the foundation and improper heating or cooling may cause an accumulation of water or condensation, your basement is especially responsive to water harm.

  • Cost-effective
  • Better indoor environment
  • Safety for the Basement Floor
  • Basement flooding protection
  • Protect against extensive damage
  • Reduce Your Electricity Bills

Conclusion:

The type and method of basement construction, the level underground, and the intended end use will affect the waterproofing device selected. Water damage can result in significant issues and costly repairs. When it comes to maintaining your basement dry, there are many various factors to consider. While every situation is different, prevention is always preferred to repair. Make an appointment with a specialist in wet basement repair Toronto and secure the basement.

Specific basement waterproofing measures are necessary to fully protect basements and homes. There is no easy way to best waterproof your basement. Therefore, various types of products and techniques have been developed to waterproof basements, along with foundation walls. The best approach to waterproofing a basement normally involves a combination of techniques, which have been broken down below.

Exterior waterproofing treatments are designed to stop moisture but not water leaks, when a home is being built. That is when the basement walls are usually accessible and clean, which creates an ideal condition for applying a waterproof coating. The asphalt-based compound is a traditional exterior coating that is applied by brush or spray equipment for a new foundation. It is important to point out that this treatment is damp proofing and not waterproofing, but the fact is that no liquid can enter the basement through gaps, cracks and holes left by form ties.

Waterproofing Requirements and Protection

It is a code requirement to apply a damp proofing treatment in many Canadian provinces to the exterior of basements. The builder is also required to install perforated plastic drain pipe near the footing to carry water away from the foundation, but these are not always effective. The drain line can be crushed during the back fill process, plus they can clog quickly with silt, water, and roots.

For a wet basement, exterior coating is used as a defense instead of a waterproof coating.

The paints and films are used to increase hydrostatic pressure and decrease the potential for leaks. The advancements in technology associated with paints has significant implications. In recent years, paints, sealers, and waterproof coatings are better than ever before. Some foundation waterproofing compounds are designed to be applied on the exterior of the foundation wall, while others are meant for interior applications, but with the same goal of establishing an impermeable barrier to water.

Technique Problems and Solutions

Unfortunately, these basement waterproofing techniques have their own challenges which can hinders their levels of success. By holding water back, there is a major buildup of hydrostatic pressure that occurs against the basement wall, as well as the thin membrane or coating. This water, under high pressure, can lead to bowing or buckling of the foundation walls. This can cause cracks that become the initial leakage points.

Drainage systems stop leaks by lowering hydrostatic pressure. This is one of the techniques which have proven effective in keeping basements dry in an interior drain system that is connected to a sump pump (Read: What is a Sump Pump?). This technique actually harnesses the power of hydrostatic pressure instead of fighting it. Unlike an exterior drainage system where the water and soil could cause issues, an interior French drain system is developed inside basement systems, meaning they cannot clog with plant roots or silt because of the location.


Watch Video: 4 Major Waterproofing Techniques

The bottom line: damp-proof the exterior of your foundation, and install an interior drain and sump pump system. It is extremely important to have two lines of defense instead of one. A well installed damp proof coating on the exterior of the foundation help to prevent moisture from seeping through the foundation walls.

wet basement solutionsThis summer brought a particularly bad set of rain storms with it, and people from the East Coast to the Midwest experienced the damage and destruction that often accompanies these torrential downpours. As the last few days of summer come to an end, many are focused on the home repairs this summer has left them with.

Common Fixes for Heavy Rain Flooding

If your house was a victim of heavy rains and flooding, it may be in need of the following fixes:

Wet Basement Solutions

Water damage will affect some 90% of basements, according to experts, and if you experienced major rain storms this summer, your basement is probably one of them. A wet basement can cause extensive damage to furniture, carpets and floorboards and can also lead to expensive repairs. Therefore, it is essential to clear the water out and prevent it from coming back in. Some wet basement solutions include installing a basement sump pump, basement window well covers and waterproofing interior basement walls.

Landscaping

Heavy rains can cause major flooding in your yard, especially if your yard doesn’t drain well. Not only does this mean you have a pond in the back of your house all summer, but it can also mean expensive damage to your home’s foundation. There are a few things you can do to ensure your yard keeps water away from your house. Your yard should slope away from your house so that water does not sit around the foundation. If it doesn’t, you should consider having someone come to look at and fix your lot grading. You can also install a French drain system, which diverts water away from your yard through a series of underground pipes.

Gutter Repairs

Gutters are meant to clear water away from your home, but when they become clogged with sticks and leaves, they can’t perform this essential task. What’s worse, this sitting water can leak into your home and cause all sorts of water damage. It is important to make sure your gutters are cleared of any debris. You should also ensure that there is no structural damage to your gutters. If gutters have holes or they are not leading water a safe distance from your foundation, make sure to fix them right away.

If you were a victim of torrential downpours this summer, it is a good idea to look around both the inside and outside of your house for potential damage. You may need to think about wet basement solutions, fixing your yard and repairing damaged gutters.
Fixing problems sooner rather than later can save you from bigger, more expensive issues down the road.

Mold can be a serious problem if allowed to develop inside of a home. This is because it gradually destroys the areas where it colonizes, potentially creating health problems for the people living in your home. Molds create allergens, which are normally substances that cause allergic reactions, as well as toxic substances that can harm your entire body. If you touch or inhale the mold, you can easily develop some allergic reactions.

How Mold Can Affect You

Continuous exposure to mold spores can irritate your eyes, nose, skin, throat, and lungs, as well as triggering asthma attacks on asthmatic individuals. People who have allergies, immune system deficiencies, as well as respiratory problems, can be highly susceptible to the dangers of molds.

They normally grow from tiny spores which cannot be seen by the naked eye, but still exist in both indoor and outdoor air. Outdoor molds begin to grow once they land on a wet surface, but indoor molds grow once they land on a liquefied surface, since molds require water to grow.

Another issue that mold creates is diminishing the value of the property. Mold is commonly known to thrive in humid, wet, and dank environments. The basement is the perfect candidate to perpetuate growth, hence the most important thing needed when organizing a new or existing home is to have a waterproofing system installed in the basement. And even if there is one, you need to check that it is not in the dire need of repair.

Stopping the Spread of Mold Is Key

Basement waterproofing is one of the most important things you need to do. There are various systems out there, but one of the most common is the French drain system. When you have this system installed, as soon as water starts seeping into the basement, it will go into the tube, then be directed towards the sump pump where is automatically pushed away from your home.

There is also several foundation repairs that you need to do, such as fixing cracks or dealing with a shifting foundation, or even bowing walls. You will not be able to fix this things on your own so you need to call in professionals to do the job in a fast and efficient manner. However the foundation needs to be repaired right away to prevent the building instability.

This needs to be done as soon as you notice any cracks, popped nails, or other various unexplained changes in the foundation of your building. While these are some of the things you need to initially do when you move into a new place, you also need to be constantly aware that things can happen.


Watch Video: Health Effects of Mold Exposure

Just don’t ignore any problems that you notice, and make sure the issues are fixed as soon as possible.

Despite homeowners knowing the information regarding molds, they often make the mistake of leaving water and dumpiness in their basement until the situation deteriorates. Water damage tends to get even worse with time, so you need to make sure you do not give mold a chance to survive.

fix basement leaksFoundation repair contractors want you to know that every house is subject to basement leaks. No matter how skilled your home builder was, there is bound to be a few cracks in the foundation of your home eventually, which may lead to basement leaks.

Causes for basement leaks:

  1. Claw Bowl Effect – This occurs when the more porous water around the house collects rainwater and ends up settling, which causes the water to settle with it causing a depression. The water then travels down this depression and pools in areas around your foundation.
  2. Clogged Drain – A footing drain is what you see outside of the house’s foundation and funnels water away from the house. The drain is porous and collects excess water, but if this is clogged, the waters ends up pooling either in the drain or at the entrance to the drain.
  3. Drainage Breakdown – This occurs when the footing drain is still clogged and the water doesn’t drain anymore, so it builds up in the backfill. If the backfill is saturated with water, this can cause hydrostatic pressure that ends up pushing the water into your basement.

Troubles of leaky basements

If a basement leaks, it can damage or ruin your carpet, building structure, and any electronic equipment you have in the room. You should keep expensive electronics off the floor to prevent any further damage. A leaky basement can also create mold problems and the costs for repairing a foundation are expensive.

How to fix basement leaks

If you find yourself in a leaky basement situation, there are a few ways to fix basement leaks. First, you should always call a professional, they will have better wet basement solutions for you and your home.

If you want to fix basement leaks yourself, the first thing to do would be to dig a six foot deep trench around the outside of your house in order to expose the foundation bricks and any pipes.

After pressure washing the bricks and letting them dry, you can then patch the cracks and install or update any necessary drainage to stop basement leaks in the future. For example, installing a french drain can be a great solution because it offers a better way to collect water.

Preventing basement leaks

If you don’t want to fix basement leaks, you should probably consider a few important preventative methods.

Be sure to clear out your gutters regularly — especially after the fall — this will make sure rainwater drains adequately from the roof of your home. Many basements leak due to sump pump issues. Prevent your sump pump from backing up by testing and inspecting it on a routine basis. Other home owners have sewer issues that lead to leaks. A blackwater valve can prevent water damage by automatically closing if the sewer backs up.

Along with cleaning out the gutters of your home, be sure to clear away any pooling water from your home after any snow or ice melts. Do this as winter comes to an end and you will have a much more enjoyable spring.

For any other preventative methods or if you have a leak, make sure you call a professional to get your basement waterproofed.

water in the basementOne common problem that homeowners face is water in the basement. A damp or watery basement can cause all sorts of trouble, from damaged internal structures to expensive home foundation repairs. The basement is the room most prone to water damage, and keeping water out can be a real pain. However, knowing what causes water in the basement and how to prevent it can help homeowners protect their property from the damaging effects of water.

List of Problems and Solutions

Here are some of the most common causes of water in the basement and easy solutions:

Leaks

Problem: Basement leaks can lead to extensive damage, and unfortunately the source of the problem can be hard to locate. Leaks can be caused by malfunctioning gutters, internal pipe bursts and water that pools around the foundation of the home.

Solution: To fix basement leaks, clean out gutters regularly to make sure that they are draining properly, and ensure that gutter pipes are pointed away from the house. To keep water from gathering around the foundation, clear snow and melting ice away from the home’s exterior. Basement window well covers can also help to ensure that water doesn’t build up around the exterior of a home.

Cracks

Problem: Cracks in basement walls, windows, doors and floors are another common cause of a wet basement. Cracks that are left unattended to can grow over time, letting even more water in and causing more interior water damage.

Solution: Keep an eye out for any noticeable cracks and fill them in right away. Small cracks in basement walls can be fixed by applying a concrete sealant. As cracks get bigger, it is a good idea to call a waterproofing expert to fix the problem to ensure the issue is taken care of properly.

Condensation

Problem: Condensation in the basement can cause a number of problems, and when it is not taken care of it can lead to the growth of hazardous mold within the home. This issue is most common in the summer when the air inside the basement is much cooler than the air outdoors.

Solution: One way to deal with excess moisture problems is to install a dehumidifier in the basement. A dehumidifier will remove excess moisture from the air and prevent condensation from building up on basement walls.

Taking a proactive approach to a wet basement is the best way to prevent major water damage to a home.

Homeowners who are aware of the common causes of water damage and know how to prevent them have a better of chance of protecting their property and keeping their families safe.

Is Basement Waterproofing Available When It’s Cold?

In Canada, it’s normal that the winter lasts over a few months. In this period, the foundation will adhere to a pattern of constant freezing and thawing. This eventually makes a gap around the house, making cellar leakage a higher chance. Additionally, when the weather gets warmer, the melting of snow and continuous rain may lead to leaking from the basement also. For all these reasons, basement waterproofing isn’t just readily done from the wintertime; however, it’s also a perfect time to protect against leaking.

What Kind Of Basement Waterproofing Is Available In Winter?

Basement waterproofing in winter can be completed inside or outside, below are fixes which are accomplished easily in the wintertime.

  • Exterior waterproofing
  • Interior waterproofing
  • Exterior and interior installation of drain and weeping tiles
  • Exterior and interior underpinning
  • Sump pump installations

Any or all the above-mentioned solutions could function to avoid a leaky basement. If you can’t do yourself, basement waterproofing companies usually have more time in the winter because it’s off-season. Though waterproofing is challenging from the winter months, it’s still an essential measure to protect against leaking.

Why Can Waterproofing A Basement Be Difficult In The Winter?

There are lots of reasons why basement waterproofing could be challenging in the winter months if handled by untrained crews, for example:

  • It is hard to dig through frozen soil around the outside if not done properly
  • The mound of soil following excavation takes place has the possibility of freezing
  • If a base wall or footing is left available to freezing temperatures for too long, frost may creep in the structure and also damage it
  • Snow and soil can be blended, making it extremely tough to clean up the site after the conclusion

Despite the challenges of basement waterproofing in the winter, it’s still essential to protect the basement from damage brought on by freezing temperatures. Choosing the proper contractor for winter waterproofing is a must.

In case you have any questions or need basement waterproofing services, contact Aquatech Waterproofing today!

Basements are some of the spaces in our houses that have proven to be difficult to manage when it comes to dampness and levels of moisture content. In some, there is actually a probability that water may fill about two inches of floor space. It is with this in mind that innovative companies have come up with membranes with an aim to make these spaces more hospitable. Waterproofing membranes have been around for some time now. With time, the designs and redesigns have improved, as has the ease of installation, plus the costs have also come down.

Types of Waterproofing Membranes

Waterproofing membranes are mainly used to prevent moisture from seeping through into the basement, while at the same time making the room warmer to make it more comfortable. It was normal before the 1990s for there to be a requirement to leave space between the membrane and the wall lining to prevent condensation on the membrane. Since the 1990s, the advice has generally changed to no ventilation between the membrane and wall. While condensation still happened, this was touted to have reduced the level of condensation.

Insulating Membrane

Insulating a membrane involves having insulation in front of a membrane, allowing the insulation to keep the membrane and moisture behind it cooler, and reducing the transfer of cold conditions into the room.

This kind of membrane is the one method of waterproofing that also aims to increase the heat of the room. If the room is warmer and the wall and outside conditions are cooler, then insulating the membrane makes the room warmer and the wall and space between the wall and the membrane cooler.

This still runs the risk of higher amount of condensation, due to the moisture condensing on the cold wall surface. Although, currently dehumidifiers come in handy and are available inexpensively in hardware stores, the condensation problem may still manifest itself. An insulated membrane is the complete opposite of insulating a membrane.

Insulating Membrane

An insulated membrane does not come as an afterthought, it is integrated in the building of the wall.

The insulation is behind the membrane, allowing for the option of the room to be warm and the wall cold, the moisture in between the wall and the membrane will be kept warm and thus does not run the risk of condensation.

This is a better option as opposed to having the insulation in front of the membrane. These membranes should be used in conjunction with other types of waterproofing equipment, such as sump tank and sump pump that can be instrumental in ridding the area of water content. When installed correctly, the membranes and an automated sump system work hand in hand to ensure that nearly all of the moisture content is drained out of the system. Alternatively, electric dehumidifiers can be used to remove the humidity in the basement, so should be installed strategically.

This is a piece of waterproofing that has come of age and that is encouraged in the building codes of some localities for efficient waterproof basements.

Don’t let your basement be uninhabitable; use waterproofing membranes.